330uF 35V Extremely Low ESR Capacitor - 38 mOhm @ 100kHz - Qty. 1
330uF 35V Extremely Low ESR Capacitor - 38 mOhm @ 100kHz - Qty. 1
- SKU:
- Category: Cameras, Electronics, ESC, Flight Controllers & PDB's, Multirotor, MultiRotor Flight Controllers, Receiver and Telemetry Gear, Video Transmitters
These Kemet Extremely Low ESR 330 uF 35V Aluminum Radial Capacitor for ESC's/Battery Connection used to clean video signal on FPV gear. Rated at 38 mOhm @ 100kHz.
Included:
-(1) 330uF 35V Capacitors
Related Products
Quick View
{"id":9671288402,"title":"5V to 3.3V Voltage Regulator for Spektrum \/ Lemon Diversity Satellite","handle":"5v-to-3-3v-voltage-regulator-for-spektrum-lemon-diversity-satellite","description":"5V to 3.3V Voltage Regulator for Spektrum \/ Lemon Diversity Satellite power. This is the Voltage Regulator only. We've done the tedious bit by mechanically connecting the components in addition to solder. All you'll need to do is solder your Spektrum \/ Lemon three wire for RX power connection as is described\u003cstrong\u003e \u003ca href=\"https:\/\/www.rcgroups.com\/forums\/showthread.php?2491127-A-2-00-adapter-lead-to-run-a-3-3V-DSM2-X-satellite-off-a-flight-controller\" target=\"_blank\" title=\"5V to 3.3V Voltage Regulator\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e. Heat shrink included to tidy things up after soldering your satellite and power.","published_at":"2017-01-18T16:07:00-06:00","created_at":"2017-05-31T14:16:10-05:00","vendor":"PlanetHobby.com","type":"","tags":["fc","fcpdb","fpv","mrelectronics","rxtelemetry"],"price":296,"price_min":296,"price_max":296,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35469977106,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LM1117-3.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"5V to 3.3V Voltage Regulator for Spektrum \/ Lemon Diversity Satellite","public_title":null,"options":["Default Title"],"price":296,"weight":28,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.planethobby.com\/cdn\/shop\/products\/voltage-regulator_4b9fd09a-4321-41fc-bd65-21d6dc64e2b4.jpg?v=1496361612"],"featured_image":"\/\/www.planethobby.com\/cdn\/shop\/products\/voltage-regulator_4b9fd09a-4321-41fc-bd65-21d6dc64e2b4.jpg?v=1496361612","options":["Title"],"media":[{"alt":null,"id":293870141474,"position":1,"preview_image":{"aspect_ratio":1.002,"height":455,"width":456,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/voltage-regulator_4b9fd09a-4321-41fc-bd65-21d6dc64e2b4.jpg?v=1496361612"},"aspect_ratio":1.002,"height":455,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/voltage-regulator_4b9fd09a-4321-41fc-bd65-21d6dc64e2b4.jpg?v=1496361612","width":456}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"5V to 3.3V Voltage Regulator for Spektrum \/ Lemon Diversity Satellite power. This is the Voltage Regulator only. We've done the tedious bit by mechanically connecting the components in addition to solder. All you'll need to do is solder your Spektrum \/ Lemon three wire for RX power connection as is described\u003cstrong\u003e \u003ca href=\"https:\/\/www.rcgroups.com\/forums\/showthread.php?2491127-A-2-00-adapter-lead-to-run-a-3-3V-DSM2-X-satellite-off-a-flight-controller\" target=\"_blank\" title=\"5V to 3.3V Voltage Regulator\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e. Heat shrink included to tidy things up after soldering your satellite and power."}
$9.00
Quick View
{"id":8674543378,"title":"BrainFPV - Barometer","handle":"brainfpv-barometer","description":"\u003cp\u003e\u003cspan\u003eThe add-on uses a barometer to measure the pressure of the ambient air, from which RE1 then calculates the altitude.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eDisplay the altitude in the OSD to always know how high you are\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUse the altitude-hold flight mode\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eGo all out and combine it with a GPS and an I2C compass to make RE1 fully navigation capable (position hold, loiter, return-to-home, waypoints).\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe made RE1 to be extendable and added an extension port with high speed interfaces (SPI, I2C), as well as general purpose signals.\u003c\/p\u003e\n\u003cp\u003eRE1-Baro is the first add-on for RE1 that makes use of the extension port and so can directly stacked on top of RE1 without any wiring, making it easy to use and keeping your build neat and clean.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTechnical Specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBarometer: Bosch Sensortec BMP280 connected using I2C.\u003c\/li\u003e\n\u003cli\u003eIncluded: RE1 - Baro add-on, 2.5mm spacers (2x), 8mm screws (2x), foam.\u003c\/li\u003e\n\u003cli\u003eSize: 36mm x 18mm. \u003c\/li\u003e\n\u003cli\u003eVertical space required: 3.5mm (makes stack 3.5mm taller than without add-on)\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-02T15:13:00-06:00","created_at":"2017-01-02T15:16:59-06:00","vendor":"BrainFPV","type":"","tags":["blackfriday","fc","fcpdb","fpv","mrelectronics","pdb","rxtelemetry"],"price":900,"price_min":900,"price_max":900,"available":true,"price_varies":false,"compare_at_price":900,"compare_at_price_min":900,"compare_at_price_max":900,"compare_at_price_varies":false,"variants":[{"id":29011700178,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BrainFPV-Baro","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BrainFPV - Barometer","public_title":null,"options":["Default Title"],"price":900,"weight":454,"compare_at_price":900,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_prod2.jpg?v=1483391820","\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_bottom.png?v=1483391821","\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_top.png?v=1483391822"],"featured_image":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_prod2.jpg?v=1483391820","options":["Title"],"media":[{"alt":null,"id":237112360994,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_prod2.jpg?v=1483391820"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_prod2.jpg?v=1483391820","width":600},{"alt":null,"id":237112393762,"position":2,"preview_image":{"aspect_ratio":2.116,"height":189,"width":400,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_bottom.png?v=1483391821"},"aspect_ratio":2.116,"height":189,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_bottom.png?v=1483391821","width":400},{"alt":null,"id":237112426530,"position":3,"preview_image":{"aspect_ratio":2.116,"height":189,"width":400,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_top.png?v=1483391822"},"aspect_ratio":2.116,"height":189,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1baro_top.png?v=1483391822","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe add-on uses a barometer to measure the pressure of the ambient air, from which RE1 then calculates the altitude.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003eDisplay the altitude in the OSD to always know how high you are\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eUse the altitude-hold flight mode\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003eGo all out and combine it with a GPS and an I2C compass to make RE1 fully navigation capable (position hold, loiter, return-to-home, waypoints).\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe made RE1 to be extendable and added an extension port with high speed interfaces (SPI, I2C), as well as general purpose signals.\u003c\/p\u003e\n\u003cp\u003eRE1-Baro is the first add-on for RE1 that makes use of the extension port and so can directly stacked on top of RE1 without any wiring, making it easy to use and keeping your build neat and clean.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTechnical Specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBarometer: Bosch Sensortec BMP280 connected using I2C.\u003c\/li\u003e\n\u003cli\u003eIncluded: RE1 - Baro add-on, 2.5mm spacers (2x), 8mm screws (2x), foam.\u003c\/li\u003e\n\u003cli\u003eSize: 36mm x 18mm. \u003c\/li\u003e\n\u003cli\u003eVertical space required: 3.5mm (makes stack 3.5mm taller than without add-on)\u003c\/li\u003e\n\u003c\/ul\u003e"}
$25.00
Quick View
{"id":8674514962,"title":"BrainFPV mPB","handle":"brainfpv-mpb","description":"\u003cp\u003e\u003cspan\u003eRE1's Companion - The RE1 can be directly plugged into Mini Power Board (mPB). This power distribution board enables a simple, clean build requiring no wiring between the two. mPB provides clean power for a noise-free FPV experience and includes highly accurate current\/voltage sensing so you always know how much battery power you have left.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTechnical Specifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower Outputs:\u003c\/b\u003e 5V (1.25A), 12V (150mA), filtered output (750mA).\u003cbr\u003e\u003cb\u003ePower Input: \u003c\/b\u003e6.5V - 20V (2S - 4S LiPo battery).\u003cbr\u003e\u003cb\u003eVoltage Measurement:\u003c\/b\u003e 151mV\/V output.\u003cbr\u003e\u003cb\u003eCurrent Measurement:\u003c\/b\u003e 25mV\/A output.\u003cbr\u003e\u003cstrong\u003eCopper thickness: \u003c\/strong\u003e4 oz (140 μm).\u003cbr\u003e\u003cb\u003eMaximum total Current to ESCs: \u003c\/b\u003e70A constant, 120A burst (10 seconds).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Power - Switching power supplies and LC filters to provide clean power for all your gear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Build - RE1 can be stacked on top of mPB without wiring, so you can keep your build clean. Easy peasy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBattery Voltage Monitoring - Accurate voltage and current measurement enable you to keep tabs on your battery usage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-02T14:57:00-06:00","created_at":"2017-01-02T15:07:14-06:00","vendor":"BrainFPV","type":"","tags":["blackfriday","fc","fcpdb","fpv","mrelectronics","pdb"],"price":2500,"price_min":2500,"price_max":2500,"available":true,"price_varies":false,"compare_at_price":2500,"compare_at_price_min":2500,"compare_at_price_max":2500,"compare_at_price_varies":false,"variants":[{"id":29011249746,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BrainFPV-mPB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BrainFPV mPB","public_title":null,"options":["Default Title"],"price":2500,"weight":113,"compare_at_price":2500,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.planethobby.com\/cdn\/shop\/products\/PDB-top.png?v=1483404698","\/\/www.planethobby.com\/cdn\/shop\/products\/PDB-diagram.png?v=1483404698","\/\/www.planethobby.com\/cdn\/shop\/products\/PDB.png?v=1483404698","\/\/www.planethobby.com\/cdn\/shop\/products\/stack_bbc93f6a-6b57-4b85-bf84-efb1948b4ed3.gif?v=1483404698"],"featured_image":"\/\/www.planethobby.com\/cdn\/shop\/products\/PDB-top.png?v=1483404698","options":["Title"],"media":[{"alt":null,"id":237111377954,"position":1,"preview_image":{"aspect_ratio":1.188,"height":505,"width":600,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/PDB-top.png?v=1483404698"},"aspect_ratio":1.188,"height":505,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/PDB-top.png?v=1483404698","width":600},{"alt":null,"id":237111345186,"position":2,"preview_image":{"aspect_ratio":1.083,"height":1304,"width":1412,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/PDB-diagram.png?v=1483404698"},"aspect_ratio":1.083,"height":1304,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/PDB-diagram.png?v=1483404698","width":1412},{"alt":null,"id":237111410722,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/PDB.png?v=1483404698"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/PDB.png?v=1483404698","width":800},{"alt":null,"id":237111967778,"position":4,"preview_image":{"aspect_ratio":0.966,"height":414,"width":400,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/stack_bbc93f6a-6b57-4b85-bf84-efb1948b4ed3.gif?v=1483404698"},"aspect_ratio":0.966,"height":414,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/stack_bbc93f6a-6b57-4b85-bf84-efb1948b4ed3.gif?v=1483404698","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eRE1's Companion - The RE1 can be directly plugged into Mini Power Board (mPB). This power distribution board enables a simple, clean build requiring no wiring between the two. mPB provides clean power for a noise-free FPV experience and includes highly accurate current\/voltage sensing so you always know how much battery power you have left.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTechnical Specifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower Outputs:\u003c\/b\u003e 5V (1.25A), 12V (150mA), filtered output (750mA).\u003cbr\u003e\u003cb\u003ePower Input: \u003c\/b\u003e6.5V - 20V (2S - 4S LiPo battery).\u003cbr\u003e\u003cb\u003eVoltage Measurement:\u003c\/b\u003e 151mV\/V output.\u003cbr\u003e\u003cb\u003eCurrent Measurement:\u003c\/b\u003e 25mV\/A output.\u003cbr\u003e\u003cstrong\u003eCopper thickness: \u003c\/strong\u003e4 oz (140 μm).\u003cbr\u003e\u003cb\u003eMaximum total Current to ESCs: \u003c\/b\u003e70A constant, 120A burst (10 seconds).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Power - Switching power supplies and LC filters to provide clean power for all your gear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Build - RE1 can be stacked on top of mPB without wiring, so you can keep your build clean. Easy peasy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBattery Voltage Monitoring - Accurate voltage and current measurement enable you to keep tabs on your battery usage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$29.00
$25.00
Quick View
{"id":9775619538,"title":"BrainFPV mPB - V2","handle":"brainfpv-mpb-v2","description":"\u003cp\u003e\u003cspan\u003eRE1's Companion - The RE1 can be directly plugged into Mini Power Board V2 (mPB). This power distribution board enables a simple, clean build requiring no wiring between the two. mPB provides clean power for a noise-free FPV experience and includes highly accurate current\/voltage sensing so you always know how much battery power you have left.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eHighly accurate voltage\/current sensing up to 6S\/130A lets you always know how much battery you have left.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTechnical Specifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower Outputs:\u003c\/b\u003e 5V (1A), 10V (1A), filtered output (1A). \u003c\/span\u003e10V output can be switched to be a second 5V (1A) output by bridging a jumper.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower Input: \u003c\/b\u003e 10V - 26V (2S - 6S LiPo battery).\u003cbr\u003e\u003cb\u003eVoltage Measurement: \u003c\/b\u003e\u003c\/span\u003e91mV\/V output (1:11 divider ratio)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eCurrent Measurement:\u003c\/b\u003e 25mV\/A output.\u003cbr\u003e\u003cstrong\u003eCopper thickness: \u003c\/strong\u003e4 oz (140 μm).\u003cbr\u003e\u003cb\u003eMaximum total Current to ESCs: 8\u003c\/b\u003e0A constant, 130A burst (10 seconds).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Power - Switching power supplies and LC filters to provide clean power for all your gear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Build - RE1 can be stacked on top of mPB without wiring, so you can keep your build clean. Easy peasy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBattery Voltage Monitoring - Accurate voltage and current measurement enable you to keep tabs on your battery usage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-02T14:57:00-06:00","created_at":"2017-06-15T13:21:08-05:00","vendor":"BrainFPV","type":"","tags":["fc","fcpdb","fpv","mrelectronics","pdb"],"price":2500,"price_min":2500,"price_max":2500,"available":true,"price_varies":false,"compare_at_price":2900,"compare_at_price_min":2900,"compare_at_price_max":2900,"compare_at_price_varies":false,"variants":[{"id":36439942802,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BrainFPV-mPB-V2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BrainFPV mPB - V2","public_title":null,"options":["Default Title"],"price":2500,"weight":113,"compare_at_price":2900,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.planethobby.com\/cdn\/shop\/products\/MPBV2_2-1.png?v=1497551224","\/\/www.planethobby.com\/cdn\/shop\/products\/mpbv2_3.png?v=1497551225","\/\/www.planethobby.com\/cdn\/shop\/products\/MPBV2_INTHEBOX2-1.png?v=1497551226"],"featured_image":"\/\/www.planethobby.com\/cdn\/shop\/products\/MPBV2_2-1.png?v=1497551224","options":["Title"],"media":[{"alt":null,"id":303898591266,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/MPBV2_2-1.png?v=1497551224"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/MPBV2_2-1.png?v=1497551224","width":600},{"alt":null,"id":303898624034,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/mpbv2_3.png?v=1497551225"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/mpbv2_3.png?v=1497551225","width":600},{"alt":null,"id":303898656802,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/MPBV2_INTHEBOX2-1.png?v=1497551226"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/MPBV2_INTHEBOX2-1.png?v=1497551226","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eRE1's Companion - The RE1 can be directly plugged into Mini Power Board V2 (mPB). This power distribution board enables a simple, clean build requiring no wiring between the two. mPB provides clean power for a noise-free FPV experience and includes highly accurate current\/voltage sensing so you always know how much battery power you have left.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eHighly accurate voltage\/current sensing up to 6S\/130A lets you always know how much battery you have left.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTechnical Specifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower Outputs:\u003c\/b\u003e 5V (1A), 10V (1A), filtered output (1A). \u003c\/span\u003e10V output can be switched to be a second 5V (1A) output by bridging a jumper.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower Input: \u003c\/b\u003e 10V - 26V (2S - 6S LiPo battery).\u003cbr\u003e\u003cb\u003eVoltage Measurement: \u003c\/b\u003e\u003c\/span\u003e91mV\/V output (1:11 divider ratio)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eCurrent Measurement:\u003c\/b\u003e 25mV\/A output.\u003cbr\u003e\u003cstrong\u003eCopper thickness: \u003c\/strong\u003e4 oz (140 μm).\u003cbr\u003e\u003cb\u003eMaximum total Current to ESCs: 8\u003c\/b\u003e0A constant, 130A burst (10 seconds).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Power - Switching power supplies and LC filters to provide clean power for all your gear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean Build - RE1 can be stacked on top of mPB without wiring, so you can keep your build clean. Easy peasy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBattery Voltage Monitoring - Accurate voltage and current measurement enable you to keep tabs on your battery usage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$79.00
$65.00
Quick View
{"id":8674432466,"title":"BrainFPV RE1","handle":"brainfpv-re1","description":"\u003cp\u003e \u003cstrong\u003eAssembled in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe use only the highest quality components and a 6 layer circuit board for optimal signal integrity. RE1 is designed, assembled and tested using cutting-edge equipment by the best men and women in New England. *Lobster roll not included*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFaster Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest and fastest STM32 F4 processor, running at 180MHz, enables RE1 to run advanced flight control code with ease.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Sensors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest accelerometers and gyroscopes from Bosch Sensortec running at 1.6kHz give RE1 unparalleled flight performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Racers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eParticipating in a race? We got you covered with RE1's integrated a multi-protocol (I-Lap, Trackmate) infrared (IR) transponder for lap timing. The transponder ID and protocol can quickly be changed in the field using the OSD menu. Race on!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGraphical OSD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrainFPV RE1 has an integrated full-graphic On-Screen Display (OSD). Having the OSD in the flight controller also saves you from the hassle of using a separate OSD, so you can keep your build clean and simple. Our OSD is fully configurable using the dRonin or Betaflight configuration software and also includes a menu to easily change settings in the field.\u003c\/p\u003e\n\u003cp\u003eThis is not your old character-based OSD, it has advanced features, such as 3D support when used with a 3D camera (e.g. NerdCam3D Mk2) \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Lights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe built dedicated hardware to control over 1000 programmable RGB LEDs. Crazy, we know. Use the OSD menu to easily change the LED color when racing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable accessory boards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRE-1-Baro: Barometer add-on for RE1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMore Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant to fly an octocopter? RE1 can control up to 8 motors. Want to attach accessories? Connect them using one of the two serial ports or the I2C port. Lost your drone? We added a dedicated buzzer port to help you find your drone when you crash (no worries, we've all been there). Sick of using external inverters for FrSky receivers and telemetry? No need for an external inverter here! RE1 has built-in inverters for both. Want more memory? We've included 128 Mbit of flash memory for settings and logging. What more could you want? A pony?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen Source\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRE1 runs either the dRonin flight stack or our own fork of \u003cstrong\u003eBetaflight\u003c\/strong\u003e. The firmware does everything, including rendering the OSD. You can use either firmware depending on your personal preference and you can always switch between the two. dRonin has an advanced autotune feature that allows you to easily tune your PID gains for super stable flight and other advanced features, like navigation capabilities. Of course, it is also well suited for racing. Betaflight on the other hand is designed solely for racing and performs very well for that purpose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***Change your VTX Channel \u0026amp; Power thru your OSD!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSupport for “SmartAudio”, which allows other devices to configure the video transmitter through the audio cable. This technology is used in the TBS Core Pro OSD and the popular TBS Vendetta racing quadcopter, where the video transmitter channel and transmit power can be changed using the OSD menu. This feature works with both the TBS Unify Pro 5.8G and the TBS Unify Pro 5.8G HV video transmitters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.\u003cbr\u003e\u003cstrong\u003eIMU:\u003c\/strong\u003e Bosch Sensortec BMI160 running at 1.6kHz (dRonin) or 3.2kHz (Betaflight), connected using SPI.\u003cbr\u003e\u003cstrong\u003eOSD\u003c\/strong\u003e: Full-graphic, PAL\/NTSC auto detect, adjustable black and white levels. 4 fully customizable pages (dRonin only) and a menu. Support for side-by-side 3D when used with a 3D FPV camera \u003cbr\u003e\u003cstrong\u003eFlash memory:\u003c\/strong\u003e 128Mbit (16MB) high-speed SPI flash memory with up to 0.5MB\/s write\/erase speeds.\u003cbr\u003e\u003cstrong\u003ePWM Outputs:\u003c\/strong\u003e 4 to 8 (8 if 2 serial ports are configured as PWM outputs) with normal PWM and OneShot (OneShot125, OneShot42, MultiShot) support.\u003cbr\u003e\u003cstrong\u003eReceiver Support:\u003c\/strong\u003e PPM, S.Bus (inverter built-in), DSM, HoTT. Selectable 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup. \u003cbr\u003e\u003cstrong\u003eTelemetry Support:\u003c\/strong\u003e FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, UAV Talk, Light Telemetry. Built-in inverter for FrSKY telemetry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSerial Ports: \u003c\/strong\u003eUp to 4 serial ports (including receiver input) when 4 PWM outputs are used (3 ports with 6 outputs, 2 ports with 8 outputs). Note: Betaflight only supports the 3 serial port \/ 6 PWM output option. \u003cstrong\u003e\u003cbr\u003eRGB LEDs:\u003c\/strong\u003e Dedicated hardware to control up to 1024 WS2812B RGB LEDs via SPI (up to 32 LEDs in Betaflight). The LED port uses 5V logic for direct compatibility with WS2812B LEDs.\u003cbr\u003e\u003cstrong\u003eIR Emitter:\u003c\/strong\u003e Dedicated hardware for infrared based lap timing with multi-protocol support (I-Lap, Trackmate).\u003cbr\u003e\u003cstrong\u003eBuzzer Port:\u003c\/strong\u003e Dedicated port for 5V (100mA max) buzzers (DC and 4kHz buzzers supported).\u003cbr\u003e\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 3 analog inputs (3.3V max.) for voltage, current, rssi sensing.\u003cbr\u003e\u003cstrong\u003eExtension Port:\u003c\/strong\u003e Hirose DF40 connector with SPI, I2C, serial interfaces, power and GPIO signals.\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 4.5V to 5.5V, 150mA.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36mm x 36mm, 30.5mm hole spacing.\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 grams.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-02T14:34:00-06:00","created_at":"2017-01-02T14:45:12-06:00","vendor":"BrainFPV","type":"","tags":["blackfriday","fc","fcpdb","featured","fpv","mrelectronics"],"price":6500,"price_min":6500,"price_max":6500,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":29010239954,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"brainfpv-RE1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BrainFPV RE1","public_title":null,"options":["Default Title"],"price":6500,"weight":8,"compare_at_price":7900,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.planethobby.com\/cdn\/shop\/products\/re1_in_the_box_800_edit.jpg?v=1483389913","\/\/www.planethobby.com\/cdn\/shop\/products\/OSD.png?v=1483389914","\/\/www.planethobby.com\/cdn\/shop\/products\/stack.gif?v=1483389916","\/\/www.planethobby.com\/cdn\/shop\/products\/re1_side_scaled.png?v=1483389918","\/\/www.planethobby.com\/cdn\/shop\/products\/RE1-Diagram.png?v=1483404653","\/\/www.planethobby.com\/cdn\/shop\/products\/LED.png?v=1483405158"],"featured_image":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1_in_the_box_800_edit.jpg?v=1483389913","options":["Title"],"media":[{"alt":null,"id":237103251490,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1_in_the_box_800_edit.jpg?v=1483389913"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1_in_the_box_800_edit.jpg?v=1483389913","width":800},{"alt":null,"id":237103284258,"position":2,"preview_image":{"aspect_ratio":1.344,"height":488,"width":656,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/OSD.png?v=1483389914"},"aspect_ratio":1.344,"height":488,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/OSD.png?v=1483389914","width":656},{"alt":null,"id":237103317026,"position":3,"preview_image":{"aspect_ratio":0.966,"height":414,"width":400,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/stack.gif?v=1483389916"},"aspect_ratio":0.966,"height":414,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/stack.gif?v=1483389916","width":400},{"alt":null,"id":237103349794,"position":4,"preview_image":{"aspect_ratio":1.174,"height":511,"width":600,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1_side_scaled.png?v=1483389918"},"aspect_ratio":1.174,"height":511,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/re1_side_scaled.png?v=1483389918","width":600},{"alt":null,"id":237125238818,"position":5,"preview_image":{"aspect_ratio":1.759,"height":1164,"width":2048,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/RE1-Diagram.png?v=1483404653"},"aspect_ratio":1.759,"height":1164,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/RE1-Diagram.png?v=1483404653","width":2048},{"alt":null,"id":237132382242,"position":6,"preview_image":{"aspect_ratio":1.237,"height":482,"width":596,"src":"\/\/www.planethobby.com\/cdn\/shop\/products\/LED.png?v=1483405158"},"aspect_ratio":1.237,"height":482,"media_type":"image","src":"\/\/www.planethobby.com\/cdn\/shop\/products\/LED.png?v=1483405158","width":596}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cstrong\u003eAssembled in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe use only the highest quality components and a 6 layer circuit board for optimal signal integrity. RE1 is designed, assembled and tested using cutting-edge equipment by the best men and women in New England. *Lobster roll not included*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFaster Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest and fastest STM32 F4 processor, running at 180MHz, enables RE1 to run advanced flight control code with ease.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Sensors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest accelerometers and gyroscopes from Bosch Sensortec running at 1.6kHz give RE1 unparalleled flight performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Racers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eParticipating in a race? We got you covered with RE1's integrated a multi-protocol (I-Lap, Trackmate) infrared (IR) transponder for lap timing. The transponder ID and protocol can quickly be changed in the field using the OSD menu. Race on!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGraphical OSD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrainFPV RE1 has an integrated full-graphic On-Screen Display (OSD). Having the OSD in the flight controller also saves you from the hassle of using a separate OSD, so you can keep your build clean and simple. Our OSD is fully configurable using the dRonin or Betaflight configuration software and also includes a menu to easily change settings in the field.\u003c\/p\u003e\n\u003cp\u003eThis is not your old character-based OSD, it has advanced features, such as 3D support when used with a 3D camera (e.g. NerdCam3D Mk2) \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Lights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe built dedicated hardware to control over 1000 programmable RGB LEDs. Crazy, we know. Use the OSD menu to easily change the LED color when racing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable accessory boards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRE-1-Baro: Barometer add-on for RE1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMore Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant to fly an octocopter? RE1 can control up to 8 motors. Want to attach accessories? Connect them using one of the two serial ports or the I2C port. Lost your drone? We added a dedicated buzzer port to help you find your drone when you crash (no worries, we've all been there). Sick of using external inverters for FrSky receivers and telemetry? No need for an external inverter here! RE1 has built-in inverters for both. Want more memory? We've included 128 Mbit of flash memory for settings and logging. What more could you want? A pony?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen Source\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRE1 runs either the dRonin flight stack or our own fork of \u003cstrong\u003eBetaflight\u003c\/strong\u003e. The firmware does everything, including rendering the OSD. You can use either firmware depending on your personal preference and you can always switch between the two. dRonin has an advanced autotune feature that allows you to easily tune your PID gains for super stable flight and other advanced features, like navigation capabilities. Of course, it is also well suited for racing. Betaflight on the other hand is designed solely for racing and performs very well for that purpose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***Change your VTX Channel \u0026amp; Power thru your OSD!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSupport for “SmartAudio”, which allows other devices to configure the video transmitter through the audio cable. This technology is used in the TBS Core Pro OSD and the popular TBS Vendetta racing quadcopter, where the video transmitter channel and transmit power can be changed using the OSD menu. This feature works with both the TBS Unify Pro 5.8G and the TBS Unify Pro 5.8G HV video transmitters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.\u003cbr\u003e\u003cstrong\u003eIMU:\u003c\/strong\u003e Bosch Sensortec BMI160 running at 1.6kHz (dRonin) or 3.2kHz (Betaflight), connected using SPI.\u003cbr\u003e\u003cstrong\u003eOSD\u003c\/strong\u003e: Full-graphic, PAL\/NTSC auto detect, adjustable black and white levels. 4 fully customizable pages (dRonin only) and a menu. Support for side-by-side 3D when used with a 3D FPV camera \u003cbr\u003e\u003cstrong\u003eFlash memory:\u003c\/strong\u003e 128Mbit (16MB) high-speed SPI flash memory with up to 0.5MB\/s write\/erase speeds.\u003cbr\u003e\u003cstrong\u003ePWM Outputs:\u003c\/strong\u003e 4 to 8 (8 if 2 serial ports are configured as PWM outputs) with normal PWM and OneShot (OneShot125, OneShot42, MultiShot) support.\u003cbr\u003e\u003cstrong\u003eReceiver Support:\u003c\/strong\u003e PPM, S.Bus (inverter built-in), DSM, HoTT. Selectable 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup. \u003cbr\u003e\u003cstrong\u003eTelemetry Support:\u003c\/strong\u003e FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, UAV Talk, Light Telemetry. Built-in inverter for FrSKY telemetry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSerial Ports: \u003c\/strong\u003eUp to 4 serial ports (including receiver input) when 4 PWM outputs are used (3 ports with 6 outputs, 2 ports with 8 outputs). Note: Betaflight only supports the 3 serial port \/ 6 PWM output option. \u003cstrong\u003e\u003cbr\u003eRGB LEDs:\u003c\/strong\u003e Dedicated hardware to control up to 1024 WS2812B RGB LEDs via SPI (up to 32 LEDs in Betaflight). The LED port uses 5V logic for direct compatibility with WS2812B LEDs.\u003cbr\u003e\u003cstrong\u003eIR Emitter:\u003c\/strong\u003e Dedicated hardware for infrared based lap timing with multi-protocol support (I-Lap, Trackmate).\u003cbr\u003e\u003cstrong\u003eBuzzer Port:\u003c\/strong\u003e Dedicated port for 5V (100mA max) buzzers (DC and 4kHz buzzers supported).\u003cbr\u003e\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 3 analog inputs (3.3V max.) for voltage, current, rssi sensing.\u003cbr\u003e\u003cstrong\u003eExtension Port:\u003c\/strong\u003e Hirose DF40 connector with SPI, I2C, serial interfaces, power and GPIO signals.\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 4.5V to 5.5V, 150mA.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36mm x 36mm, 30.5mm hole spacing.\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 grams.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
